邮箱:toyou@toyougood.com   电话: 400-998-2766

搜索
确认
取消
1/1
浏览量:
1000

PIM201208S1R0M

零售价
0.0
市场价
0.0
浏览量:
1000
产品编号
所属分类
2012系列
数量
-
+
库存:
0
联系我们
1
产品描述

Features

● Low Rdc.uH in this package size

●High Saturation Current

●High strength and corrosion resistance

●100% lead (Pb) free meet RoHS standard

●Measuring frequency 1MHz

 

Application

●DC/DC converters.

● Notebook/Desktop/Server applications. 

● Battery powered devices.

● LCD displays, HDDs, DVCs, DSCs, PDAs etc

●Pad、Smart phone、Drive、Smart watch、Smart glass

●Baseband power supply, Amplifier, Power management, Module power supply, Camera power management

 

Specifications

PIM201208S(2.0*1.2*0.8mm)

P/N

L0(µH)
@ (0A) 1MHz

Rdc(mΩ)

Heat rating current Irms ( A )

Saturation current
Isat ( A )

Typical

Max

Typical

Max

   Typical

Max

PIM201208SR47M

 0.47

34

50

3.1

2.7

5.0

4.6

PIM201208S1R0M

1.0

55

70

2.8

2.4

4.0

3.5

PIM201208S2R2M

2.2

160

185

1.9

1.5

2.6

2.3

 

Product Characteristics

Item

要求
Requirements

试验方法及备注
Test Methods and Remarks

绝缘电阻
Insulation Resistance

≥100MΩ

在电感器线圈和本体顶面中间施加
100 V 直流电压保持 60 s。
100 V DC between inductor coil and The
middle of the top surface of the body for 60 seconds.

可焊性
Solderability

电极面 90%以上覆盖新的焊料。
90% or more of electrode area shall
be coated by new solder.

在(245±5) ℃熔融的焊锡
(96.5Sn/3.0Ag/0.5Cu)中浸(5±1) s。
Dip pads in flux and dip in solder pot
(96.5Sn/3.0Ag/0.5Cu) at (245±5) ℃ for (5±1) seconds.

耐焊接热
Resistance to Soldering Heat

外观无可见机械损伤;
电感量变化率:±10%以内。
No visible mechanical damage.
Inductance change: Within ±10%

在(260±5) ℃熔融的焊锡(96.5Sn/3.0Ag/0.5Cu)中浸 (10±1) s。
Dip pads in flux and dip in solder pot(96.5Sn/3.0Ag/0.5Cu) at (260±5) ℃ for (10±1) seconds.

端子强度
Adhesion of terminal
electrode

元件的端子与本体结合无松动、无脱落。
Strong bond between the pad and
the core, without come off PC board.

将电感器用(260±5) ℃,(20±5) s 焊在带有 0.3 mm 厚锡膏的基板上,
然后用冶具垂直电极面方向加压 10 N,(10±1) s。
Inductors shall be subjected to (260±5)℃ for (20±5) s Soldering in the base whit 0.3mm solder.
And then aplomb electrode way plus tax 10 N for (10±1) seconds.

耐高温
High temperature

外观无可见机械损伤;
电感量变化率:±10%以内。
No visible mechanical damage.
Inductance change: Within ±10%

温度(+125 ± 2 )℃,时间(1000±2) h;
Temperature is (+125±2)℃ and keep (1000±2) hours.

耐低温
Low temperature

外观无可见机械损伤;
电感量变化率:±10%以内。
No visible mechanical damage.
Inductance change: Within ±10%

温度(-55℃ ±2) ℃,时间(1000±2) h;
Temperature is  (-55±2)℃ and keep (1000±2) hours.

温度变化
Thermal shock

外观无可见机械损伤;
电感量变 化率:±10%以内。
No visible mechanical damage.
Inductance change: Within ±10%

(-55±3) ℃,时间(30±3) min ↔ (125℃±2) ℃/(30±3) min,
转换时间(2~3) min,循环32次; 在室温下放置 2 小时后、48 ±4小时内测试。
The test sample shall be placed at (-55±3)℃ and
(125±2)℃ for (30±3) min, different temperature
conversion time is 2~3 minutes. The temperature
cycle shall be repeated 32 cycles. Placed at room
temperature for 2 hours, within 48 hours of testing.

温度特性
Temperature
characteristic


Within ±20%

a:+20 ℃ (30~45) min →
b: -40 ℃ (30~45) min  →
c: +20 ℃ (30~45) min →
d: +125 ℃ (30~45) min  →
e: +20 ℃ (30~45) min

恒定湿热
Static
Humidity

外观无可见机械损伤;
电感量变化率:±10%以内。
No visible mechanical damage.
Inductance change: Within ±10%

将电感器放置在于湿度(95±3)%RH,温度(60±2)℃ 的环境中存放(1000±4)h,
在室温下放置2小时后、 48小时内测试。
Inductors shall be subjected to (95±3)%RH . at
(60±2)℃ for (1000±4) h . Placed at room temperature
for 2 hours, within 48 hours of testing.

耐久性(寿命)
Life

外观无可见机械损伤;
电感量变化率:±10%以内。
No visible mechanical damage.
Inductance change: Within ±10%

温度(85 ±2)℃,时间(1000±4) h,施加 Irms,
在室温下放置2小时后、48小时内测试。
Inductors shall be store at (85±2)℃ for (1000±4) hours with Irms applied.
Placed at room temperature for 2 hours, within 48 hours of testing

 

未找到相应参数组,请于后台属性模板中添加
暂时没有内容信息显示
请先在网站后台添加数据记录。

联系我们

电话:

400-998-2766

地址:

江苏省昆山市元丰路229号向隆科技园

全站搜索

请输入您的关键词,以便了解我们公司信息。

搜索
Copyright 通友智能装备(江苏)有限公司 © All rights reserved
网站建设:中企动力 昆山